LR6 / AA rechargeable battery with a regulated output voltage of 1.5 volts and an internal lithium-ion battery. The electronically regulated output voltage of 1.5 V is revolutionising the mobile power supply for many standard applications. A built-in Li-ion battery with a nominal voltage of 3.6V to 3.7V is regulated down to 1.5V with the help of electronics in the form of a PCB.

1.5 Volt AA Mignon LR6 rechargeable batteries based on lithium-ion technology with 3390 mWh.

Important: The Keeppower 1.5V Li-ion batteries can be charged via the integrated micro USB socket or with the XTAR L4, XTAR L8, XTAR MX4, XTAR VX4 or Soshine Chocolate 1.5V charger. Charging with a conventional charger for NiMH/NiCD or Li-ion batteries is not permitted.
Chargers for Li-ion 1.5V batteries other than the models listed are not compatible. Charging via USB is possible with any USB 5V connection (smartphone, mains adapter, power bank, laptop, etc.), so you remain flexible and always have a charging option to hand.

The stable and high output voltage makes the 1.5 volt lithium-ion rechargeable batteries compatible with all devices that are optimised for operation with disposable batteries and where the low voltage of the NiMH rechargeable battery causes problems. The high voltage results in high performance in many devices, e.g. many torches or fairy lights are brighter or motors (toys, kitchen appliances) run faster than with NiMH rechargeable batteries.

Stable and high output voltage of 1.5V over the entire cycle.

In addition to the constant voltage of 1.5V, the battery offers major advantages thanks to the undervoltage cut-off. Most applications do not have their own undervoltage cut-off, but do not damage the electronically regulated 1.5V Li-ion, as is the case with NiMH/NiCD batteries. 1000 charging cycles are therefore perfectly possible with the 1.5V lithium-ion battery under real conditions.

Ideally suited for: Game cameras, fairy lights, modelling, radios, photographic equipment, flash units and much more.

Disadvantages: The electronic control only allows the discharge current specified in the key figures. The batteries can only be charged via USB or a suitable charger.
Please note: Electric motors, e.g. in toy cars, require several times more current than the specified continuous load when starting up.

Further information:

https://www.pocketnavigation.de (very detailed information and comparative tests on the 1.5V batteries)

Safety instructions:

Please note that lithium cells should only be used by qualified persons.
Incorrect handling or short-circuiting can lead to fire or explosion.

Further properties:

Lithium-ion batteries are thermally stable and are not subject to a memory effect.
They work on the basis of lithium and are characterised by a high energy density.

Scope of delivery:

1x 1.5V Li-ion battery
When ordered in pairs (2 pieces), a USB cable with two micro USB plugs and a battery box are included.

Operating principle:
When using a high-quality 3.7V Li-ion battery with 900mAh, the energy is up to 3390mWh. After the output voltage has been reduced to a constant voltage of 1.5 V by the electronics, this corresponds to a capacity of 2260mAh.