Keeppower 26650 Li-Ion battery *6000 mAh - **PCB protected, with cable connection

The Keeppower 26650 Li-Ion battery offers a high capacity of *6000 mAh and is equipped with an integrated protection circuit (PCB**). Thanks to the pre-connected cable, this battery is ideal for direct use in LED lighting, DIY projects or industrial applications.

Main features:

• Capacity: *6000 mAh (typical), 5850 mAh (minimum)

• Nominal voltage: 3.6 V - 3.7 V

• Maximum discharge current: 10 A

• Protection circuit (**PCB): Integrated - reliably protects against overcharging, deep discharge and short circuiting

• Cable connection: Pre-assembled - easy integration into your application

• Cable length: 60.0 mm

• Dimensions: Ø 26.6 mm × 69.5 mm incl. cable outlet 72.5 mm

• Weight: approx. 102 g

Technical data

• Charging end voltage: 4.20 V ± 0.05 V

• Final discharge voltage: 2.5 V

• Chemistry: Lithium-ion (Li-Ion)

Ideal for:

• LED lights

• DIY and maker projects

• Embedded systems

• Applications with permanently installed battery pack

Customised battery packs:

Do you need several cells in series or in parallel? Akkuteile.de manufactures customised battery packs according to customer requirements - even in small series. On request, including certificates such as UN38.3, IEC, RoHS, transport documents or customised cable and connector solutions. Feel free to contact us!

Safety instructions:

Please only use the battery in suitable devices and ensure compliance with the technical limits. Removing or damaging the protective circuit can lead to dangerous situations.

* The nominal capacity of a rechargeable battery indicates the amount of energy it can store under ideal laboratory conditions. This value is measured at a constant temperature and under specified conditions in order to provide a reliable reference for the performance of the battery. Measurements with standard household devices (e.g. USB measuring devices, chargers with an analysis function) often show lower values, as these operate under different conditions and cannot achieve the manufacturer's laboratory conditions.

** PCB = Protection Circuit Board: An electronic protection circuit that reliably protects the battery against overcharging, deep discharge, overcurrent and short circuits - ideal for safe use in sensitive electronics.

Note:

Charging lithium-ion batteries requires a special charger that charges the batteries using a special charging process. (CCCV = constant current, constant voltage.) The batteries must not be charged above a voltage of 4.2 volts, otherwise there is a risk of fire and explosion. It is advantageous to charge the batteries only up to approx. 4.1 volts, as this significantly increases the service life or number of charging cycles (possibly up to double). Only lithium-ion chargers may be used for charging. However, cheap chargers sometimes have the disadvantage that they do not switch off safely at the end of the charging process, but continue to charge the batteries with a small charging current, which can be dangerous.

Furthermore, rechargeable batteries and batteries do not belong in household waste! Please dispose of them as prescribed by law in the municipal collection centres or in the [usually green] containers provided for this purpose by retailers.