Murata US18650VTC5 - 2600mAh, 3.6V - 3.7V industrial cell
Item number: 100666
Hersteller: Sony
A high-quality industrial high-current cell developed by Sony with a discharge current of up to 30A (12C)! Ideally suited for tools and industry.
Please note: The Murata industrial cell has no electronic protection circuit and no sufficient insulation as well as no labelling, these cells are intended for further processing.
For use in e-cigarettes or e-shisha, Keeppower offers the US18650VTC5-NH1826 cells, which are sufficiently insulated and labelled with important key figures and are suitable for use in devices equipped exclusively with protective electronics.
Murata US18650VTC5 unprotected industrial cell.
Type. Capacity | 2600mAh |
Min. capacity | 2500mAh |
Nominal voltage | 3.6V - 3.7V |
Final charging voltage | 4.2V ± 0.05V |
Final discharge voltage | 2,0V |
Charging current | 0.25A - 2.5A |
Max. Charging current | 4A |
Max. current output constant | 12C = 30A |
Chemical composition | LiNiMnCoO2 |
Protective circuit | no |
Positive pole | flat (flat top) |
Diameter | 18.2 mm ± 0.05 mm |
Height | 65.0 mm ± 0.15 mm |
Weight | 45 g ± 0.1 g |
Charging method | CC-CV |
Test results (discharge curve) | Vapour batteries |
Test results | Lygte-Info |
Safety instructions:
Lithium cells may only be operated with protective electronics!
Please note that lithium cells may only be used by authorised specialist personnel.
Incorrect handling or short-circuiting can lead to fire or explosion.
Please note: The Murata industrial cell has no electronic protection circuit and no adequate insulation and lacks labelling; these cells are intended for further processing.
For use in e-cigarettes or e-shisha, Keeppower offers the US18650VTC5-NH1826 cells, which are sufficiently insulated and labelled with important key figures and are suitable for use in devices equipped exclusively with protective electronics.
Further features:
Lithium-ion batteries are thermally stable and are not subject to memory effect.
They work on the basis of lithium and are characterised by a high energy density.
*Further options:
- No selection: Battery cell without options as in the main picture.
- Raised positive terminal: A button (nipple) welded to the positive terminal using a special welding process raises the flat positive terminal by approx. 2 mm, similar to a normal battery, for example (at extra cost).
- Solder lug: A metal tongue (W: 7mm x L: 25mm x D: 0.15mm), which is firmly connected to the positive and negative terminals of the battery and is used to solder a connecting wire or other batteries to the component. (for an extra charge)
U - Both solder tags point in one direction (e.g. for parallel connection or soldering to electronic components)
Z - Solder tags point in opposite directions. (e.g. series connection or construction-related soldering)
Notes on use and distribution.
The industrial cells are intended for further processing (labelling of the cells is not sufficient for B2C)
The batteries are not suitable and intended for use by consumers. Murata Manufacturing sells the batteries exclusively in the commercial trade (B2B) for further processing and production of battery packs for use in closed battery packs for household appliances, bicycles and tools.
Charging current normal/charging time | 2500mA/3h |
Max. charging current/charging time | 4000mA/2.5h |
Charging operating temperature | 0 °C - 45 °C |
Discharging operating temperature | -20 °C - 60 °C |
Notes:
Charging lithium-ion batteries requires a special charger that charges the batteries using a special charging process. (CCCV = constant current, constant voltage.) The batteries must not be charged above a voltage of 4.2 volts, otherwise there is a risk of fire and explosion. It is advantageous to charge the batteries only up to approx. 4.1 volts, as this significantly increases the service life or number of charging cycles (possibly up to double). Only lithium-ion chargers may be used for charging. However, cheap chargers sometimes have the disadvantage that they do not switch off safely at the end of the charging process, but continue to charge the batteries with a low charging current, which can be dangerous.
Furthermore, rechargeable batteries and batteries do not belong in household waste! Please dispose of them as prescribed by law in the municipal collection centres or in the [usually green] containers provided for this purpose by retailers.
Produktanfragen
Fragen zum Produkt per Mail
Haben Sie weitere Fragen zum Produkt an: info@akkuteile.de
Ihre Mail wird bei uns binnen 1 Werktages beantwortet.
Unser Support Team erreichen Sie Mo. bis Fr. von 9:00 Uhr bis 15:00 Uhr unter 06021 - 9212263
Zahlungsarten
PayPal - bis 10.00h bestellt - Zustellung am nächsten Werktag
Vorkasse - Zustellung innerhalb 2-3 Werktagen
Sofort-Überweisung - Zustellung innerhalb 2-3 Werktagen
Bank-Überweisung - - Zustellung innerhalb 2-3 Werktagen
Masterpayment - Zustellung innerhalb 2-3 Werktagen
Informationen:
sobald der Zahlungseingang erfolgreich war, erhalten Sie automatisch eine Bestätigung per Email
Für die Länder Schweiz und Liechtenstein fallen lediglich die Nettopreise der jeweiligen Artikel an, ohne deutsche MwSt. Die Verzollungskosten werden separat berechnet. Bei Einfuhr müssen die Steuern des jeweiligen Landes beglichen werden.
Soweit in der Artikelbeschreibung keine andere Frist angegeben ist, erfolgt die Lieferung der Ware in Deutschland innerhalb von 3 - 5 Tagen, bei Auslandslieferungen innerhalb von 5 - 7 Tagen nach Auftragsbestätigung (bei vereinbarter Vorauszahlung nach Zahlungseingang). Beachten Sie, dass an Sonn- und Feiertagen keine Zustellung erfolgt. Bei Selbstabholung informieren wir Sie per E-Mail über die Bereitstellung der Ware und die Abholmöglichkeiten. In diesem Fall werden keine Versandkosten berechnet.
Versand und Zustellung Montag - Freitag
Für die Länder Schweiz und Liechtenstein fallen lediglich die Nettopreise der jeweiligen Artikel an, ohne deutsche MwSt. Die Verzollungskosten werden separat berechnet. Bei Einfuhr müssen die Steuern des jeweiligen Landes beglichen werden.